Autopilot Jetson AGX Xavier Industrial Embedded PC Board Module
Embedded System Development Board NVIDIA Jetson AGX Xavier Industrial Carrier Board Y-C9-AGXi Development Board
NVIDIA Jetson AGX Xavier series modules integrate a 256-bit wide LPDDR4X memory interface implemented as eight 32-bit channels with x16 subpartitions. The memory controller provides a single read or write command and row address to both sub-partitions in thechannel to transfer 64 bytes, but provides three independent column address bits to each sub-partition, allowing it accessdifferent 32 byte sectors of a GOB between the sub-partitions. It provides connections between a wide variety of clients,supporting their bandwidth, latency, quality-of-service needs and any special ordering requirements that are needed. TheMSS supports a variety of security and safety features and address translation for clients that use virtual addresses.NVIDIA Jetson AGX Xavier series modules have two power inputs: 1) a 5V Regulator input and 2) a 9V - 20V input. Power isthen supplied to the devices on board through a power management IC (PMIC) and dedicated voltage regulators; all internalmodule voltages and IO voltages are generated from this input. An optional back up battery can be attached to the VCC_RTCmodule input (this will maintain the on system RTC, when VIN is not present). VIN must be supplied by the carrier board thatthe Xavier module is designed to connect to.
Nvidia Development Board NVIDIA Jetson AGX Xavier Industrial Y-C9-AGXi
Feature and Specifications
Product Name | Y-C9-AGXi |
Module | NVIDIA Jetson AGX Xavier Industrial |
AI Performance | 30 TOPS |
Memory | 32GB 256-bit LPDDR4x (ECC support) 136.5GB/s |
GPU | NVIDIA Volta architecture with 512 NVIDIA CUDA cores and 64 Tensor cores |
Vision Accelerator | 2x PVA |
CPU | 8-core NVIDIA Carmel Armv8.2 64-bit CPU 8MB L2 + 4MB L3 |
DL Accelerator | 2x NVDLA |
Storage | 64GB eMMC 5.1 |
Networking | 10/100/1000 BASE-T Ethernet |
UPHY | 8x PCIe Gen4 3x USB 3.1 Single Lane UFS |
Camera | Up to 6 cameras (36 via virtual channels) 16 lanes MIPI CSI-2 D-PHY 1.2 (up to 40 Gbps) C-PHY 1.1 (up to 62 Gbps) |
Power | 20W | 40W |
Display | Three multi-mode DP 1.2a/e DP 1.4/HDMI 2.0 a/b |
Other I/O | USB 2.0 UART, SPI, CAN, I2C, I2S, DMIC & DSPK, GPIOs |